Code CR4100 Quick Start Uživatelský manuál stáhnout pdf (Strana 9)

C006244_01_CR4100_QuickStart_Guide

2.10 - Baery Status Indicator

Baery is empty.

Baery is charging.

Baery has a full charge.

1. At the top of the CR4100, peel back the rubber grommet to expose the SD Slot

(Figure 12).

2. Insert the SD Card in the proper orientaon.

3. Push the rubber grommet back into the slot.

4. Make certain that the rubber grommet is seated properly, to maintain a seal

and ensure the CR4100’s IP65 rang.

2.9 - Connecng the Communicaon Cable to the Charging Cup

2.8 - Using the Charging Cup

1. Slide the Charging Cup (Figure 10) onto the boom of the CR4100.

2. Connect the Power Supply into the back on the Charging Cup. This will charge the CR4100.

3. Please refer to the LED Indicator Secon (Secons 2.3 and 2.4) of this QuickStart Guide for

charging LED status descripons.

Figure 10

Figure 12

2.11 - Inserng an SD Card

1. To use the CR4100/Charging Cup as a USB Client, slide the white switch located on the back

of the Charging Cup to the (C) posion (See Figure 11).

2. Connect the communicaon cable (USB cable supplied) to the Cradle and the

host device (PC).

Figure 11

The baery status indicator is located in the top right corner of the CR4100 window screen.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Žádné komentáře

Code CR4100 Quick Start Uživatelský manuál Strana 9